The USB-C VGA Multiport Adapter lets you connect your USB-C or Thunderbolt 3 (USB-C) enabled Mac and iPad Pro to a VGA display, while also connecting a standard USB device and a USB-C charging cable.
The USB-C VGA Multiport Adapter allows you to mirror your Mac or iPad Pro display to your VGA-enabled TV or display in up to 1080p HD. It also outputs video content like movies and captured video. Simply connect the adapter to a USB-C or Thunderbolt 3 (USB-C) port on your Mac or iPad and then to your TV or projector via a VGA cable (sold separately).
Vga Port For Mac
Use the standard USB port to connect devices such as your flash drive or camera or a USB cable for syncing and charging your iPhone, iPad, or iPod. You can also connect a charging cable to the USB-C port to charge your Mac or iPad Pro.
\n The USB-C VGA Multiport Adapter lets you connect your USB-C or Thunderbolt 3 (USB-C) enabled Mac and iPad Pro to a VGA display, while also connecting a standard USB device and a USB-C charging cable.\n
\n The USB-C VGA Multiport Adapter allows you to mirror your Mac or iPad Pro display to your VGA-enabled TV or display in up to 1080p HD. It also outputs video content like movies and captured video. Simply connect the adapter to a USB-C or Thunderbolt 3 (USB-C) port on your Mac or iPad and then to your TV or projector via a VGA cable (sold separately).\n
\n Use the standard USB port to connect devices such as your flash drive or camera or a USB cable for syncing and charging your iPhone, iPad, or iPod. You can also connect a charging cable to the USB-C port to charge your Mac or iPad Pro.\n
You can use an external display, such as the Apple Studio Display, a projector, or an HDTV with your MacBook Air. The USB-C ports on your MacBook Air support video output. You can attach one external display with up to 6K resolution at 60Hz.
To see where your ports are located on your MacBook Air, see Take a tour: MacBook Air with M2 chip or Take a tour: MacBook Air with M1 chip. You can learn about each port and what it looks like with the Apple Support Article Identify the ports on your Mac, and make sure you have the right adapters with Adapters for your MacBook Air.
In case anyone else has the same question, the solution doesn't lie with the HDMI port at all. Rather, the Thunderbolt port is the way to go if you need to connect a VGA monitor. Thunderbolt is backwards-compatible with Mini DisplayPort. Apple's Mini DisplayPort to VGA adapter is all that's necessary to connect a VGA monitor to the Mac Mini via the Thunderbolt port:
Many TVs just have horrible HDMI pictures. I have multiple HD tvs, and some are just blurrier via HDMI than via VGA. No idea why. A DVI/Displayport signal has more density, but should support the same things, but the device has to treat the signal right. One of our HD tvs (one given to me by Microsoft, of all) is notably blurry on HDMI compared to VGA, and doesn't give the option not to display the tvsafe margins. But on VGA, it lets the connected device choose the exact pixels.
Then I started researching a little bit, and finally I found several comments out there explaining that this converter takes power from the HDMI connector that the Apple TV has but is not part of the standard, and the new Mac Mini apparently do not support that power supply in the HDMI port. Thus making this converter not to work appropriately. As a matter of fact, the Mac Mini detects that something is connected to it, the monitor detects that something is connected to it, but no signal reaches the monitor. This could be obviously a failure in the HDMI or simply an expectable correction to the HDMI into standards.
The USB-C VGA Multiport Adapter connects a Mac that has a Thunderbolt 3 (USB-C) or USB-C port to a display that uses a VGA cable. It also connects your Mac to USB-A devices and includes a USB-C port for charging your Mac laptop. All three ports can be used simultaneously.
Use the USB-C port of this adapter for charging your Mac, not for data transfer or video. For example, you can connect one end of the Apple Thunderbolt 3 (USB-C) Cable or Apple USB-C Charge Cable to the USB-C port of this adapter, and connect the other end to an Apple USB-C Power Adapter.
This port delivers a maximum of 60W power, suitable for MacBook models and 13-inch MacBook Pro models. For the best charging performance on 15-inch and 16-inch MacBook Pro models, connect the power supply directly to your Mac, not through the adapter.
Connect a display to a USB-C port: Use a Thunderbolt 3 (USB-C) cable to connect the display to the USB-C port on your Mac. For older displays, use a USB-C Digital AV Multiport Adapter or a USB-C VGA Multiport Adapter to connect the display to the USB-C port on your Mac.
The aging connection is still being discussed here as some people hold on to older devices still sporting it, such as large CRT (Cathode Ray Tube) monitors, projectors, and legacy hardware for support reasons.
The release of HDMI 1.4 in 2009 offered far higher resolution video, at 4,096x2,160 24Hz and 3,840x2,160 at up to 30Hz, along with support for a built-in 100Mbps Ethernet connection for sharing a network connection, ARC (Audio Return Channel), 3D Over HDMI, and a Micro HDMI connector.
The most recent version, HDMI 2.1, boasts the ability to view 4K video at 120Hz and 8K video at 120Hz, thanks to its higher potential bandwidth of 48Gbps. The standard also includes Dynamic HDR support, DSC (Display Stream Compression), an HFR (High Frame Rate) mode for up to 10K-resolution video, enhanced refresh rate functions offering variable refresh rates (VRR) and low latency modes, and other features.
However, DisplayPort was developed and has evolved with a different focus. While HDMI is primarily an AV interface that is also supported by monitors, DisplayPort is instead meant for computer displays, rather than other screen types.
DisplayPort 1.1 didn't really change the capabilities of DisplayPort, but did introduce the ability to use alternative link layer technologies, for example the use of fiber optics, to extend the length of the cable without degrading the signal. Support for HDCP was also included.
By 2010, DisplayPort 1.2 increased its total data rate to 17.28Gbps, allowing it to to handle 1080p240 video as well as 2,560x1,440 at 165Hz, 4K at 75Hz, and 5,120x2,880 at 30Hz. DisplayPort 1.2 also included support for Apple's Mini DisplayPort connector, which shrunk down the size of the connector considerably. After a period on its own, as technology allowed, it shared the same connector as Thunderbolt and Thunderbolt 2.
The addition of DSC helped enable an increase in supported resolution, without needing an increase in bandwidth from 1.3, so it could support 7,680x4,320 video (8K) at 60Hz, and even 4K video at 120Hz complete with HDR.
VESA introduced the DisplayPort 2.0 standard in 2019, promising support for resolutions higher than 8K, enhanced HDR support, and better refresh rates, as well as improvements to how it handles multiple displays, with a view to 4K virtual reality. In theory, it could handle at most three 10K-resolution displays at 60Hz, three 4K displays at 90Hz, or one 16K-resolution display at 60Hz.
For USB Type-C connectors, it can support technologies including Thunderbolt 3, DisplayPort, and HDMI, meaning supported devices can employ a USB-C port to provide signal to a monitor. As well as eliminating the need for a socket for a larger connector on mobile devices, it is typical that a USB-C display will also be able to handle some other data-related items, such as USB ports, to take advantage of any remaining bandwidth without requiring the use of other ports on the host device.
It is a similar story for DisplayPort over USB Type-C, as its Alt Mode can support full DisplayPort Audio and Video at 8K 60Hz, SuperSpeed USB 3.1 data, and up to 100W of power delivery. It is also backwards compatible to VGA, DVI, and HDMI with adaptors, with support for up to HDMI 2.0a at 4K resolution.
In the case of Thunderbolt-based setups, multiple devices can be daisy-chained to a USB Type-C port, including a monitor, further reducing the number of devices physically connected to the computer. Then there's the extensive market of docks that provide a physical DisplayPort, HDMI, or even VGA or DVI connection for the user, that also connects to the computer via USB Type-C or ThunderBolt.
Apple's currently-available roster of devices is quite up to date in terms of what is supported, even without needing to acquire adapters. This, of course, excludes iPhones and iPad models equipped with Lightning and not USB-C, as they will need to use an adapter to output video to a display non-wirelessly, though there's always the option of using Screen Mirroring via AirPlay.
On the Mac side, the iMac and iMac Pro models have USB-C ports capable of native DisplayPort output, with HDMI, DVI, and VGA supported using adapters. The Mac mini also offers USB-C DisplayPort support, but also includes a HDMI 2.0 port.
The current Mac Pro's configurable video options include HDMI 2.0 and DisplayPort connections as standard, though quantities vary depending on the MPX modules used. Since it also include PCIe expansion, this serves as further expansion opportunities, as well as DisplayPort-supporting USB-C connections.
For a start, you should steer away from DVI and VGA where possible. While there may be compatibility reasons to use either of them, such as being the last available ports on a display, or the only port on a projector in a conference room, there are usually better options available to you.
Again, there's exceptions to this, such as users with a need for multiple high-resolution monitors that are on the bleeding edge of standards and expense reports. Those users will want to pay closer attention to each standard's merits and capabilities, but the average user doesn't need to worry about that. 2ff7e9595c
Comentários